Changing Modes; Function Selection And Activation; Combined Use Of [Mode] And [Set] Buttons; How To Operate The Instrument - Bowers Metrology UniCal 300 Notice D'utilisation

III.3 Changing modes
Press [mode] button until required mode is displayed.
III.4 Function selection and activation
A quick press on [mode] or [set] button will display mode position.
III.5 Combined use of [mode] and [set] buttons
Keep [mode] and [set] buttons pressed simultaneously until you get the wanted measuring direction and resolution.
This function is not possible with 0.01mm (.0005") instrument.
IV How to operate the instrument
IV.1 Switch on
Press quickly the [set] button.
The display show the last mode setting and reading (for ex.: mode ref.).
54 54
54 54