Model Code - HYDAC ELECTRONIC HDA 4700 Notice D'utilisation

HDA 4700 / 4400 with flush membrane

5 Model Code

Accuracy
4 = 1 % FS max., stainless steel (thin film), relative
7 = 0.5 % FS max., stainless steel (thin film), relative
Mechanical process connection
Z = Flush
Electrical connection
5 = Male connector EN 175301-803, 3 pole + PE
(including female connector)
6 = Male connector M12x1, 4 pole
(without female connector)
Signal
A = 4 .. 20 mA, 2 conductors
B = 0 .. 10 V, 3 conductors
Measuring ranges in bar
0001 (-1..1); 0009 (-1..9)
02.5; 04.0; 06.0; 0010; 0016; 0025
(For accuracy "4" only)
0040; 0060; 0100; 0250; 0400; 0600
Mechanical connection
G01 = G1/2 A, DIN 3852
G02 = G1/2 with additional front O-ring seal
G04 = G1/4 with additional front O-ring seal (only for measuring ranges ≥ 40bar)
G05 = G1/4 A, ISO 1179-2 (only for measuring ranges ≥ 40bar)
G12 = G1/2 with additional front O-ring seal and cooling zone
Modification Number
000 = Standard
Notes:
Special models on request.
On instruments with a different modification number, please read the label or the
technical amendment details supplied with the instrument.
Status 2021-02-10 HYDAC ELECTRONIC GMBH
HDA 4 X Z X – X – XXXX – XXX – 000
7
E
Part no.: 669872