Operating Precautions; Synthetic Table Of Phases - Ravelli FRANCESCA Manuel D'utilisation Et D'entretien

8.7 Operating precautions

• In case of faulty operation turn the stove off pressing button no. 3.
• Do not manually load the fire pot with pellets.
• Any build up of unburned pellets inside the fire pot after repeatedly trying to light the stove, must be removed before further
attempts.
• Do not use any fuels other than wood pellets.
• Should the ignition system be faulty, do not attempt to light the stove using flammable materials.
8.8. Remote control (only for free standing stoves)
IR receiver for remote control (12 volts batteries code LRV08 not included)

8.9. Synthetic table of phases

PHASE
FINAL CLEANING
IGNITION
WAITING FOR FLAME
FLAME PRESENT
WORKING
MODULATION WORKING
ECO STOP
T ON
COOLING/WAITING FOR
START
COOLING/WAITING FOR
RESTART
ON/WAITING FOR RE-
START
HOT SMOKE
OFF
User and maintenance manual for stoves with RDS technology
• P1 - P2 Set temperature
• P4 - P5 Set power
• OK
• OK multifunction
• P1 - P4 multifunction
• P2 - P5 multifunction
DESCRIPTION
The stove is switching off, the cooling phase is not yet completed.
The ignition phase has started,the pellets are loaded into firebox.
The pellet is lighted by the hot air passing trought the electrical igniter.
The flame is visibile in the fire pot.
The stove completed switch ON phase; you can change power.
The room temperature set has been reached.
Comfort Climate activated, temperature set has been reached; the stove is off.
The room sensor is off or an external thermostat has been connected.
The stove is cooling DOWN:when stove is cooled down can start automatically.
The stove is in the cooling DOWN: when the stove is cooled down can restart automatically.
The switch ON phase, when the stove is warm, started. The operation is same of phase ON
The max temperature of smokes is reached: to reduce temperature, feeding pellets and air draft redu-
ce at POWER 01.
The stove is off.
BASIC FUNCTIONS
: allows to set the desired value for the room
temperature from 44 °F to 104 °F and set "EST" or
"MAN"
: allows to set the working power between a range of
minimum 1 to maximum 5
: by keeping pressed for 3 second longs it allows the
manual switch on and off of the stove .
ADVANCED FUNCTIONS
: if you press one time you can enter in the main menu
and the confirmation of the setting. It is possible to
exit step by step from each menu by keeping pressed
each time.
: to scroll the icons in the menu
: to modify the setting in the menu
01/02/2016
Pag.30