Safety Considerations
Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be
risk of fi re, electric shock and personal injury, including the
following:
1.
Work area environment
Don´t expose the machine for rain. Don´t use it in
damp or wet locations or in presence of fl ammable
liquids or gases.
2.
Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the
material you are working with ie asbestos. Don´t use
the machine for purposes that it isn´t
intended for.
3.
Body injuries
Never let the suction come in contact with parts of
the body. Th e strong suction eff ect can
hurt the blood-vessels in the skin. Do not repair the
electric components yourself, get
somebody qualifi ed. Faults may cause injury. See also
below under warnings.
TECHNICAL DATA
HxWxL
Weight
Inlet
Collection container
Hose length(∅50)
Flow Max
Negative Pressure, Max
Motor Power
Fine fi lter polyester
Degree of separation,
(EN 60335-2-69, Class M) 99.9%
Sound level*/
* / Sound Pressure Level at 1.6 m height and 1 m according to DIN
EN ISO 3744 in free space at maximum airfl ow.
2010-08-16
followed to reduce the
2.5 kW
3 kW 60 Hz
- 1470x660x1100 mm -
ca 85 kg
ca 85 kg
X 50 mm
X50 mm
40 l
40 l
5-15 m
5-15 m
260 m3/h
320 m3/h
28 kPa
31 kPa
2.5 kW
3.0 kW
1.8 m2
1.8 m2
99.9%
60 dB(A)
60 dB(A)
DC 3800i - 7
4.
Don´t abuse cord
Never pull the machine by cord. Keep cord from
heat and sharp edges. Check the electric cable regu-
larly if damage.
5.
Important measure
With cleaning and maintenance on the machine, the
power cable should be disconnected from the supply.
6.
Maintain the machine with care
Keep machine clean and check that the hose is enti-
red and that all gaskets are tight. Follow instructions.
Keep handles dry and free from oil and grease.
7.
Checking of damage
Before futher use of the machine it should be ca-
refully checked that the machine is un damaged. If
there are any damaged parts these should be repaired
by of a Dustcontrol authorized service center.
8.
Warning
Use only accessories and replacable parts which are
available in Dustcontrol catalogue.
When using faulty parts or pirate parts (especially
fi lter) the machine could leak out unhealthy dust
which can cause personal injuries.
Vacuum producer capacity
kPa
20
10
DC 3800i
2.5 kW 50 Hz
100
200
DC 3800i 3.0 kW 60 Hz
3
300
400
m
/h
Art Nr 94132