Technical Data; Symbols; Intended Use; Electrical Connection And Operation - Festool RS 2 Guide D'utilisation

Technical data

RS 2
Wattage W
No load speed rpm
No. of strokes spm
Sanding stroke mm (in.)
Sanding base mm (in.) 115 x 225 (4.53 x 8.86)
Weight kg (lbs)
Safety
RS 2 E
Wattage W
No load speed rpm
No. of strokes spm
Sanding stroke mm (in.)
Sanding base mm (in.) 115 x 225 (4.53 x 8.86)
Weight kg (lbs)
Safety
1.1 1.2
330
10 000
20 000
2.4 (0.1)
2 . 5 ( 5 . 5 )
/ II
V
A
330
4 000 - 10 000
Hz
8 000 - 20 000
W
2.4 (0.1)
~
n
2.5 (5.5)
/ II
rpm
spm
The sanders are designed for sanding wood,
plastic, metal, stone, composite materials, paint /
varnish, fi lling material and similar materials.
Materials with an asbestos content must not be
processed with these tools.
The machines must not be damp nor operated in
a damp environment for electrical safety reasons.
The machines may only be used for dry sanding.
ity for any damage or accidents resulting from
incorrect use.
The mains voltage must be the same as that
specifi ed on the ratings plate!
The switch (1.1) is used to switch the tool on and
off. The switch can be locked with the button (1.2)
on the side for continuous operation. The switch
can be released by pressing again.
5

Symbols

Warning of general danger
Read the
Notes!
Wear protective goggles
Wear a dust mask
Volts
Amperes
Hertz
Watt
Alternating current
No load speed
0
Class II Construction
Revolutions per minute
Strokes per minute

Intended use

The user bears sole responsibil-
Electrical connection and opera-
Operating Instructions/
tion