Rear Panel - Peavey Classic 30 Mode D'emploi

Rear Panel

13
14
EXTERNAL SPEAKER JACK (13)
This is provided for connection of an external speaker cabinet. Minimum total impedance is 16 ohms.
REMOTE SWITCH JACK (14)
This is provided for the connection of the optional remote footswitch. The footswitch is used to select
the Lead or Normal channels and defeat reverb. When using the remote footswitch, always insert the
plug fully (second click) to ensure proper operation.
LINE CORD (120 V PRODUCTS ONLY)
For your safety, we have incorporated a three-wire line (mains) cable with proper grounding facilities. It
®
is not advisable to remove the ground pin under any circumstances. If it is necessary to use the Classic
30 without proper grounding facilities, suitable grounding adapters should be used. Greatly reduced
shock hazard exists when the unit is operated with the proper grounded receptacles.
10