The Function Buttons; On/Off B Utton - SOLIS PERFECT AIR Mode D'emploi

THE FUNCTION BUTTONS

s
If you briefly press the function buttons, the chosen setting is made and the
●
corresponding function lights switch on. Each press of a button is followed by
a sound signal.

ON/OFF B UTTON

Once the power plug is plugged in, you can switch the air humidifier on with
●
the ON/OFF button. A signal sounds and the display indicates the current room
GB
air humidity.
Each time the appliance is switched on with the ON/OFF button the following
●
standard setting is activated: high ventilation (High Speed).
Press the ON/OFF button another time to switch the appliance off. A signal
●
sounds, the display goes out and the appliance switches off.
ACTI VA TI NG T HE CHILD S AFETY DEVICE W ITH TH E
ON /OFF B UTTON
You can activate resp. deactivate the child safety device with the ON/OFF but-
●
ton. To activate the child safety device, press and hold the ON/OFF button for
at least three seconds until a signal sounds and the function light next to Child
Lock switches on. The buttons (except for the one that will deactivate the child
safety device) are now locked. If you wish to deactivate the child safety device,
press and hold the ON/OFF button for another three seconds until a signal
sounds and the function light next to Child Lock goes out.
MOD E B UTTON FOR VEN TILATION SPE ED
You can choose between three ventilation speeds and the automatic program
●
with this button:
High Speed for high ventilation speed / humidification
Normal Speed for medium ventilation speed / humidification
Sleep Speed for low ventilation speed / humidification
Intelli. Speed for automatically adjusted ventilation speed /
humidification:
The Intelli. Speed function is set to reach a room air humidity of 60 %; once
●
the room air humidity reaches 60 %, the appliance stops. The ventilation speed
resp. humidification power is adjusted to the current room air humidity:
– If the room air humidity is below 40 %, the appliance switches to High Speed.
– If the room air humidity is between 41 % and 55 %, the appliance switches
to Normal Speed.
– If the room air humidity is between 56 % and 60 %, the appliance switches
to Sleep Speed.
102
In general: The higher the ventilation speed, the more intensive the humidifica-
●
tion will be, meaning the set value for room air humidity is reached more quickly.
Pressing the button again in the Intelli. Speed setting switches the ventilation
●
speed back to the High Speed setting.
ACTIV AT ING THE IO N FUNC TIO N W I TH THE M O DE BUTTON
You can switch the ion function on or off with the Mode button. To activate
●
the ion function, press and hold the Mode button for at least three seconds
until the function light next to Ionizer switches on. If you want to switch the ion
function off, press and hold the Mode button for another three seconds until
the function light next to Ionizer switches off.
HUM IDIT Y BUTTON
With this button, you can set the desired room air humidity. The following
●
settings are possible:
-- % 40 % 45 % 50 %
Each press of the button increases the value by 5 %. If the set value (between
●
40 % and 75 %) is above the current room air humidity, the appliance works
in the selected ventilation speed to achieve the set value. Once the set value is
reached, the appliance stops and only starts up again after the room air humidity
has dropped under the set value. In the -- % setting, the appliance works per-
manently and independently of the current room air humidity.
In the Intelli. Speed function, the room air is automatically humidified to 60 %,
●
no actual air humidity value has to be set.
If you press the Humidity button again after the 75 % setting, the -- % setting
●
lights up.
TI MER BUTTO N
In general: The timer function is disabled in the standard -- h setting.
●
As soon as you press the Timer button, 01h lights up for one hour. By each
●
press of the button, the value can be increased by one hour, until you reach a
maximum of 12 hours. After that , -- h lights up in the display and the timer is
switched off again.
You can use the Timer function to set the number of hours after which you want
●
the appliance to switch on (Automatic start-up) or off (Automatic shutdown).
55 % 60 % 65 % 70 % 75 %
103
GB