Putting Into Operation; Description Of The Appliance; Filling The Tank - SOLIS Ultrasonic Tower Mode D'emploi

Unpacking
• Carefully remove the unit from its box.
• Remove the unit from the plastic bag.
• Warning: the mist outlet is packed in a red bag
inside the box insert. Make sure that you remove
the mist outlet from the packaging.
• Review the information given on the rating plate
about the mains supply.
• Use the original packaging for storing the appliance
if you do not use it all year round.

Putting into operation

Find the ideal location for your appliance:
• Do not place it directly next to a radiator or on a
floor with underfloor heating. The moisture in the
mist can damage the floor surface (6 and 7) (see
Safety Instructions).
• The mist outlet must not be pointed directly at plants
or other objects. Keep a distance of at least 50 cm)
(10).
• Soak the demineralisation cartridge in a bowl of water
for at least 24 hours before using it. The resin has to
absorb water to achieve full performance.
• On average the demineralisation cartridge should be
replaced every 2-3 months. This interval can be shorter
or longer depending on the hardness of your water.
• Read the instructions under «Filling the Tank» for
filling the water tank (12).
E
• Place the water tank onto the base and insert the
mist outlet (13).
• Insert the plug into the mains socket and switch
on the appliance using the on/off switch (15).
• The appliance will reach full capacity about 10 to
15 minutes after been switched on.
• Make sure that the power cord is not pinched
anywhere (9). Do not operate the appliance if the
cord is damaged (2).
30

Description of the appliance

���� ������ ����������
����� ����
����������� �������
���������������� ���������
����� ���� ���
������� �����
����� ����

Filling the tank

Always switch off the appliance before re-
moving the water tank. Do not reach inside
the nebuliser space while the appliance is
running!
Do not operate the appliance when the water tank is
empty! When the water reaches the minimum level,
the unit switches off automatically.
• Make sure that there are no foreign objects inside
the water tank.
• Remove the water tank cap from the tank (11)
(Warning: mist outlet is loosely inserted!). Fill the
tank with clean, cold tap water (12). Close the cap
of the water tank securely! Place the water tank
onto the base and insert the mist outlet (13). Do not
add any additives to the water (14)!
• Insert the plug into the power socket and switch on
the appliance (15).
�����
��������� �����
��������
��� �����
����� ����