Associated Documents; Safety Instructions; Product Description; Functional Description - Rittal CMC III Notice D'installation Et Notice D'utilisation Succincte

EN
Notes on documentation, Safety instructions, Product description
1 Notes on documentation
This installation and short user's guide is intended for experienced trained specialists and contains only
EN
the most important information concerning the assembly, installation and function of the CMC III tem-
perature sensor (subsequently called temperature sensor).
1.1

Associated documents

Assembly, installation and user's guide CMC III temperature sensor.
It is available at www.rittal.com and contains the complete application-relevant information and techni-
cal data for the temperature sensor with regard to:
– Further assembly possibilities
– Functions
– Configuration possibilities
– Detailed operating instructions
– Troubleshooting
2

Safety instructions

– Assembly and installation of the temperature sensor may only be performed by experienced trained
specialists.
– The temperature sensor housing must not be opened.
– The temperature sensor may not come in contact with water, aggressive or inflammable gases and
vapours.
– The temperature sensors may only be operated within the specified environmental conditions
(see Section 3.4).
3

Product description

3.1

Functional description

The temperature sensor is used to measure the temperature at the operational location. It supplies the
temperature values measured at the connected CMC III PU. The temperature sensor contains an iden-
tification that allows it to be recognised automatically by the CMC III PU.
3.2

Proper use

The CMC III temperature sensor is used only for the temperature measurement inside a server enclo-
sure or outside the enclosure using the supplied sensor. It may be used only together with the CMC III
PU. Any other use is not permitted.
3.3

Scope of delivery

– CMC III Temperature sensor
– Provided accessories (see Fig. 1)
– Installation and Short User's Guide
3.4

Operating conditions

The temperature sensor may only be operated under the following operating conditions:
Temperature operational range:
Humidity operational range:
Degree of protection:
5
+0°C to +55°C
5% to 95% relative humidity, non-condensing
IP30 in accordance with EN 60 529
Rittal CMC III Temperature sensor