BORETTI BPC-45 Notice D'emploi page 41

Setting the clock
The combimagnetron will signal that it is connected to the power mains with a double beep.
To set the system time, press the "TIMER FUNCTIONS" button
Each command activated is confirmed by a beep.
ACTIONS THAT ARE POSSIBLE WITH THE Combimagnetron OFF
- Turn on combimagnetron light
- Change the Language
When the combimagnetron is off, you can change the language of the display by simultaneously selecting
the + button in the lower right for at least 3 seconds.
Then use to select the language and confirm the choice with
for at least 3 seconds
Set the clock with the + and - buttons: during setting
the separator dots flash, the time has been set when the
dots remain steady on.
The combimagnetron light is turned on/off by touching
the symbol as shown in the figure.
.
41
GB
and