BORETTI BPC-45 Notice D'emploi page 39

INTRODUCTION TO THE Combimagnetron
Dear Customer, your new combimagnetron is controlled by an electronic board that constantly monitors its
operation to improve its performance.
The touch controls are state-of-the-art, precise and reliable.
The interface is elegant, orderly and discrete, more intuitive than ever!
A few buttons, many functions and no combination or sequence is difficult to enter, so you can concentrate on
following the recipe and the combimagnetron is ready in two clicks!
Installation and hook-up
Dear Customer, this combimagnetron is a sophisticated electronic appliance, classified as a durable good. Its
installation requires qualified professionals for both the hook-up of the power line and itsplacement in the kitchen
counter.
(SEE ASSEMBLY INSTRUCTIONS ON PAGE 56)
Before hook-up
When the combimagnetron is connected to the electric mains for the first time, the display will ask you to select
your language;
use the buttons to select the language you want;
use the button to confirm the choice;
((from now on, the language choice will remain fixed even when their are power outages).
Now, it goes into demonstration mode
Demonstration mode
This is the mode that the combimagnetron is normally in every time that there is a power failure and, consequently,
when it is first hooked-up:
the purpose is to show how you can control it with a recorded sequence of commands.
In this mode, the combimagnetron is never REALLY turned on, i.e., the heating elements are never
powered!
The control panel is INACTIVE and, so, the combimagnetron will not respond to commands!
To disable the demonstration mode, touch the light
symbol for five seconds:
operation and ready for turning on.
Now you can set the time but it is not necessary for
turning on the combimagnetron.
39
the control will go to normal
GB