Adjusting The Reflector; Maintenance And Cleaning - LIVARNO LUX 14101902L Instructions D'utilisation Et Consignes De Sécurité

Adjusting the reflector

Note: only change the position of the reflector
if the light is switched off.
Allow the light to cool off completely.
Turn the reflector
2
Adjusting the lamp arm
Note: only change the position of the lamp
arm if the light is switched off.
10
Allow the light to cool completely.
Model 14101902L: turn the lamp arm
the desired position.
Model 14102002L: hold on to the lamp arm
Loosen the locking lever
to the desired position. Tighten the locking lever
Note: retighten the locking lever
arm moves out of position.
10

Maintenance and Cleaning

DANGER OF ELECTRIC
SHOCK! First unplug the mains plug
socket.
CAUTION! DANGER OF BURN INJURIES!
Allow the lamp to cool down completely.
DANGER OF ELECTRIC
SHOCK! For electrical safety, never clean the light
with water or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Disposal
The package and packaging materials
consist entirely of environmentally friendly
materials. They can be disposed of at your
local recycling facility.
Start-up / Maintenance and Cleaning / Disposal / Information
to the desired angle.
to
10
10
. Move the lamp arm
9
if the lamp
9
from the
6
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
2
of in a separate refuse collection. This applies to the
product and to all components bearing this sym-
bol. Do not dispose of products bearing this sym-
bol in your normal household waste, but instead
they must be taken for recycling to a collection site
for electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and protects the environment.
Information
Warranty
.
You receive a 36 month warranty on this product,
10
. valid from the date of purchase. The appliance has
9
been carefully produced under strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In
the event of a defect arising during the warranty pe-
riod, please send the appliance to the listed Service
Centre address, making reference to the following
article number: 14101902L / 14102002L.
Wear parts (such as bulbs) and damage caused by
improper handling, non-observance of the operating
instructions or unauthorised interference are excluded
from the warranty. The performance of services under
the warranty does not extend or renew the warranty
period.
Manufacturer / Service
Briloner Leuchten GmbH
Im Kissen 2,
59929 Brilon,
Germany
Tel.: +49 (0) 29 61 / 97 12–800
Fax: +49 (0) 29 61 / 97 12–199
E-mail: kundenservice@briloner.com
www.briloner.com
IAN 110588
GB 15