Publicité
Les langues disponibles
Les langues disponibles
Be carefull! Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are present.
Do not let bare skin come into contact with hot surfaces.
Description
A. LCD screen
B. Control buttons
C. Motion detector
Location and Connection
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
Choose a suitable location for the heater which is at least one metre away from any
obstructions, walls or inflammable materials (see also safety instructions).
Make sure a functioning heater is always placed on a solid, flat and horizontal surface.
Check whether the Main switch is set to OFF (O).
Fully extend the power cord and plug into a suitable 220-240V socket. To prevent the
circuit overloading, check that no other appliances are connected to the same group.
Set-up and Operation
Activate the heater by switching the main switch to I (ON).The display lights up and shows the
ambient temperature. If you take no further action the light on the display switches off after
10 seconds.
Mode:
Pressing the MODE button will start the heater. Every time you press the MODE button, the
heater will sequentially select another function:
(fan) > LO > HI > THERM.\ ECO >
D. Grip
E. Air discharge grille
F. Rear grille
16
G. Main switch
H. Dust filter
(frost protection) >
On/OFF
etc.
Publicité
