Using The Timer - ETNA OM170RVS Mode D'emploi

USE

Using the timer

A
The timer can be used in different ways:
• It allows you to determine the duration of baking/roasting/grilling. The oven switches off
when the set cooking time has elapsed. You will hear an audible signal.
The maximum cooking time you can set is 10 hours.
• You can also use the timer to set the time at which the baking/roasting/grilling should
stop. The oven switches off when the set end time has been reached. You will hear an
audible signal.
• Finally, you can enter both a length of time as well as an end time (an automatic baking
process). The oven will start and stop automatically. An audible signal will sound once the
automatic baking process has finished.
• The timer can also be used as a kitchen timer. The kitchen timer will not switch off the oven
(see 'Kitchen timer').
Attention!
The oven cannot be used when it is in 'lock' mode (no oven symbol visible in the
display). Switch the oven to stand-by mode by pressing and holding the clock
button until the oven symbol appears in the display.
Programming the baking time
1. Set the clock to standby operation by depressing the clock button until the oven symbol
appears in the display.
2. Select a temperature with the temperature knob and an oven function with the oven
function knob.
The temperature light for the oven lights up and the oven is switched on.
3. Press the clock button several times until 'dur' appears in the display.
4. Use the '-' and '+' buttons to set a cooking time (maximum 10 hours). First set the hours
(U) and confirm using the clock button. Now set the minutes (M).
5. Press the clock button to confirm the set time.
EN 12