Maintenance And Cleaning - Domo DO432K Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

DO432K
4. Pull the handle of the pivot filter to swing it open to the left.
5. Put a filter bag of size 1x4 into the filter basket and fill the bag with the desired
amount of coffee.
6. Place the carafe on the keep warm plate.
7. Plug in the coffee maker.
8. Turn on the appliance by pressing the on/off switch. The red light in the switch
will light up and the coffee will start running.
9. When the coffee is done, you can take the carafe off of the plate. If, however,
you would already like to take coffee while the coffee is still running, the drip
stop function will make sure that no coffee will drip on the plate.
ATTENTION: THE DRIP STOP ONly WORKS WHEN THE lID IS ON THE
GlASS CARAFE.
10. When the coffee is ready, the keep warm plate will keep the coffee warm for as
long as the coffee maker is switched on.
11. Switch off the coffee maker if you no longer need it.
12. Easily remove the filter bag from the holder by using the removable filter basket.
ATTENTION: AlWAyS lET THE APPlIANCE COOl DOWN FOR AT
lEAST 5 MINUTES IN BETWEEN TWO COFFEE BREWING SESSIONS.

MAINTENANCE AND CLEANING

1.
let the appliance cool down.
2.
Make sure that the on/off switch is in the 'off' position and that the appliance is
unplugged before you start cleaning.
3.
Open the pivot filter and take the removable filter basket out of the holder.
4.
Clean the filter basket and the glass carafe in hot soapy water. Rinse them
thoroughly and let them dry.
5.
The body of the appliance and the pivot filter holder can be cleaned with a soft,
damp cloth. Do this regularly and wipe dry afterwards.
Attention:
Do not use any abrasive cleaning products.
Never immerse the appliance in water.
Never use a cloth to clean the water reservoir, because this could leave behind
lint. Rinse the reservoir with water.
34

Publicité

Table des Matières
loading

Table des Matières