switel DFT 897 Série Mode D'emploi page 152

Preparing the Telephone
Inserting the batteries
Open the battery compartment cover. Connect the
plug leading from the battery pack to the corres-
ponding socket in the battery compartment. Insert
the battery pack in the battery compartment. Close
the battery compartment cover.
a
Attention: Only use the battery pack supplied
(Li-Ion, 3.7 V, 465 mAh).
Pay attention that the cable is not jammed.
Charging the batteries
☞
Before the handset is used for the first time, insert it in the base station /
charging station for at least 16 hours.
The handset warms up during the charging process. This is normal and
does not represent a risk. Use only the adapter plug unit provided for the
charging station. The battery status is shown on the display. When the battery
capacity is nearly exhausted, the battery symbol will flash in the display and
you will hear the battery warning sound (if the option is switched on) / menu
item "Sound / Tones /Battery low"). You still have up to ten minutes of talk time.
Setting the time and date on the handset
At initial operation the handset does not have the correct time (e.g. for entries
in the call list/answer machine). Date and time are set through the menu item
"Settings / Clock/Alarm / Date/Time".
Setting the display language
The display language is available in 4 languages. The default setting is "Ger-
man (Deutsch)". Set the language using the menu item "Einstellungen/MT-Ein-
stellung/Sprache".
Auto Answer
If this function is activated, an incoming call is taken when the handset is
removed from the base station. The automatic answering function is activated
and deactivated using the menu item "Settings / HS settings / Auto answer".
6