General Instructions; Scope Of Delivery - PROUSER SC1600A Mode D'emploi

GENERAL INSTRUCTIONS

Intended use
The PRO-USER SC1600A Jump Starter is intended to jump start any 12V car or truck. After each failed
attempt to jumpstart your car, take a break for at least 3 minutes to avoid overheating. With the unit on
board the vehicle, you may start your vehicle´s motor even with a weak or dead battery in case of need.
Maintenance
Most important for maintaining the SC1600A is to charge the unit completely every 3 month to 100%.
In the event of failure to comply with this obligation, the battery may deep-discharge and the unit might
be damaged. From time to time, make sure all cable connections are clean and tight and possibly existing
fans are working correctly. If necessary, clean the unit with care, using a dry cloth. Don't try to open the
body casing. There are no user-serviceable parts inside. Damage due to improper use, modifications or
attempted repairs lead to the exclusion of liability and the loss of warranty. If the unit is damaged, the
appliance must be discarded. Cleaning and user maintenance shall not be made by children.
Packaging materials
To avoid danger of suffocation, do not let children play with foils or other packaging materials. Remove
all protective coverings before putting the device in operation.
Storage
When not in use, store the device in a dry environment. Store the device in a safe place out of the reach
of children. Protect the unit from direct sunlight, heat and moisture, strong vibration and mechanical
influences. Always store the device with its cables stowed carefully with the device so that no short-
circuits may occur.

SCOPE OF DELIVERY

• Pro-User SC1600A
• 12V DC charging adapter
• micro USB charging cable
• Operating manual
6