Important Safety Instructions - PROUSER RFC4500 Mode D'emploi

ENGLISH
A － Digital Display
B － Alternator Test Button
C － Control Dial for Voltage and Current
D － LED indicators
E － Battery Test Button
INTRODUCTION
The "Pro-User Intelligent Battery Charger & Jump Starter" is part of the family of advanced
battery chargers manufactured by Pro User International Ltd. Pro-User chargers will
increase your battery's performance and prolong its life.
Please carefully read and attend the following safety and operating instructions.

IMPORTANT SAFETY INSTRUCTIONS

General
Before using the device, study the instruction sheet. Always disconnect the mains supply
before making or breaking the DC connections.
Gases
When the battery is being charged you may notice bubbling in the fluid caused by the
release of gas. As the gas is flammable, avoid naked flames, glowing or electrostatically
charged matter and sparks in the vincity of the battery. Provide adequate ventilation.
Because of this risk of explosive gas, only connect and disconnect the battery leads when
the mains supply is disconnected.
Type of batteries
This charger is suitable for lead acid batteries only and should not be used to recharge any
other type of battery.
Points of note
•
Protect the charger against rain, damp and heat. Do not cover the ventilation holes.
When not in use, store the charger in a dry area to avoid moisture
•
Do not charge faulty batteries.
•
Attend to instructions of the battery manufacturer and the vehicle manufacturer
concerning battery charging.
Repair
•
There are no user-serviceable parts inside the device. Any attempt at modification or
repair by the user will entail the loss of your guarantee.
•
The mains supply cord of this device can only be repaired at specialized workshops; Do
not use the charger if one of the cords have been damaged.
3