Important Safety Instructions - PROUSER IBC7500B Mode D'emploi

The IBC7500B Intelligent Battery Charger is an advanced battery charger manufactured for Pro-User
Europe GmbH that will increase your battery's performance and prolong its life. The IBC7500B Intelligent
Battery Charger with Bluetooth functionality and the free app "Check & Charge" enables you to check
and charge your battery with your connected Bluetooth-enabled device. (iOS 8.0 or later, or Android 4.4
or later and a mobile device with Bluetooth BLE Ver. 4.3 or later is needed to connect to the charger).
We have taken numerous measures in quality control to ensure that your product arrives in top condition,
and will perform to your satisfaction.
Please carefully read and follow the safety and operating instructions. Not following these instructions
may result in a serious accident, including damaged property, serious or even fatal injuries. If the device
is passed on to another person, this manual must also be handed over with it.
CAUTION: Please read this instruction manual carefully before installing and starting up
the device. Do not operate the device unless you have fully read and understood all the
provided information. If you are not confident working with 12V/24V DC voltage or are
unsure of what you are doing, consider to seek for professional help e.g. a car garage or
your vehicle´s manufacturer. Failure to observe these instructions may cause an
electrical shock, fatal or serious injury, material damage or impair the function of the
device.
Read your vehicle's owner's manual!
Some vehicle manufacturers may have special requirements before charging the vehicle´s battery.
(e.g. fuses that have to be removed or certain security demands).
Pro-User accepts no liability for direct or indirect damage caused by faulty connections, a usage of
damaged or altered products, a usage for purposes other than described and especially caused by failure
to follow these instructions.
NEVER CONNECT to unsuitable batteries (e.g. NiCd-batteries). Do not charge batteries
that are known to be broken. The battery charger is not designed as a jump starter. Not
following these instructions could cause serious personal injury or material damage.
This unit has safeguards against overheating, reverse-polarity and short-circuit. Despite
this, it is highly recommended not to touch or connect the red to the black clamp or to
connect the charging cables in reverse polarity. This could cause dangerous sparks and
electric arcing. Only connect and disconnect the battery, when the mains supply is
disconnected.
For indoor use only: Do not use the unit close to open fire. Do not operate the unit in
explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Please stop using the device, if the unit is getting very hot, is smoking or is showing any
abnormal behaviour.
Pro-User Europe GmbH is not liable for any direct or indirect damages or injuries caused by the use of
the device, especially caused by failure to follow these instructions.
Type of Batteries
This charger is intended to be used only on 12.8V Lithium batteries and 12V & 24V Lead Acid Batteries,
e.g. WET, Gel-, AGM- (including Calcium-) and VRLA-Batteries. Do not try to charge unsupported types of
batteries like NiCd or non-rechargeable batteries. Follow the recommendations of your battery´s
manufacturer.
INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

3