Install Door Panels - Jenn-Air JPK36BNXESS Instructions D'installation

Remove the mounting bracket and reinstall it into the predrilled holes
on the opposite end of the panel.
NOTE: The end with the mounting bracket is now the top of the door
panel.
2.
Move the shoulder washers from R
to L.
A. Shoulder washer and hex head pointed screw
B. Installation block
Remove the screws and shoulder washers from the holes marked with
an "R." Reinstall the shoulder washers into the predrilled holes marked
with an "L."
IMPORTANT: Use the installation block as a guide for depth.

Install Door Panels

1.
Expose mounting hardware.
A. Film covering
Peel back the film covering on the door panel so that no film is trapped
between the door panel and the door. Do not completely remove the
film until the installation is complete.
6
A
A B
A
2.
Remove door adjustment pin cover
and hinge covers.
A. Door adjustment pin cover
B. Top hinge cover
A. Bottom hinge cover
Open the doors and remove the hinge covers and the door adjustment
pin cover(s) to expose the mounting holes.
3.
Prop open door.
A. Foam packaging
Use foam packaging to prop and hold the door open while installing a
door panel.
A B
A
A