Connecting An Electric Strike Or Lock; Connecting An Automatic Gate Opener; Configuration Of The Camera Roadside Panel - Extel WEVPMH 001 Guide D'installation Et D'utilisation

LK-TEST
ON OFF
SW3
L+ L- L+ L- ML+ML- P+ P-
UNLOCK AC-IN 18V-OUT
DC-OUT
ON
SW1
OFF
13~15V-OUT
PTR1
VR1
100~240 V AC
Connect the batteries respecting the polarities, with the cables and bridges provided to that effect. Once the installation
completed and checked, put the SW3 switch on "ON". When powering up the power supply unit, the roadside panel emits
b. Connecting an electric strike or lock
- Voltage controlled lock or strike:
Connect it directly to the L+ and L- terminals (terminals to the left) in the power supply unit.
When the command is sent, a gate icon is displayed on the LCD screen of the camera panel.
The electrical lock or strike you are going to install has to be imperatively
CAUTION
equipped with a mechanical memory like all Extel references.
SW1 allows selecting an impulsive (I or position ON) or hold down (O or position OFF) control.
The hold time of the strike is 5 to 14 s see chapter 9 "configuration".
It is possible to test rapidly the operation of the lock by pressing the button "LK test" in the power supply block.
CFI EXTEL WEVPMH 001 - 03/2010 - V1
8GB
and
LK-TEST
L+ L- L+ L-
ML+ML- P+ P-
ON
SW1
OFF
- Voltage failure controlled lock or strike: (unavailable in Extel range)
Connect it directly to the L+ and L- terminals (terminals to the right) in the power supply unit.
When the command is sent, a gate icon is displayed on the LCD screen of the camera panel.
SW1 allows selecting an impulsive (I or position ON) or hold down (O or position OFF) control.
The hold time of the strike is 5 to 14 s see chapter 9 "configuration".
It is possible to test rapidly the operation of the lock by pressing the button "LK test" in the power supply block.
L+
c. Connecting an automatic gate opener
Connect the option WE 8111 BIS to the L+ and L- terminals of the power supply unit (red wire of the WE 8111 BIS to L+,
black wire to L-).
Then connect the 2 white wires of the WE 8111 BIS to the control terminals of your automatic gate opener.
SW1 allows selecting an impulsive (I or position ON) or hold down (O or position OFF) control.
The hold time of the strike is 5 to 14 s see chapter 9 "configuration".
It is possible to quickly test the operation of the automatic gate opener control by pressing the "LK test" button in the
power supply unit.
LK-TEST
black red
WE 8111 Bis
white white
to automatic gate opener
6

CONFIGURATION OF THE CAMERA ROADSIDE PANEL

a. The roadside panel is factory set in French
If necessary modify as follows: on the keypad type # 8009, administrator code "66666666" and then type "8".
Choose the language of the menu, by typing the No. corresponding and then validate with #.
Note in case of inactivity of the keypad, the screen returns automatically to the main menu.
CFI EXTEL WEVPMH 001 - 03/2010 - V1
In this case,
put SW1 on OFF
L- L+ L- ML+ML- P+ P-
ON
SW1
OFF
In this case,
put SW1 on ON
L+ L- L+ L- ML+ML- P+ P-
ON
SW1
OFF
0 Chinese
1 English
2 French
3 Portuguese
4 Spanish
5 German
6 Italian
7 Dutch
9GB