Table des Matières
Publicité
8
Special accessories
Pin saw blade-universal
135 x 2,0 x 0,25 Z 10
blade mm 1 set = 6 pieces,
Pin saw blade- wood/plastic mm
135 x 2,0 x 0,25 Z 7
1 set = 6 pieces,
Pin saw blade-wood mm
135 x 3,0 x 0,5 Z 4
1 set = 6 pieces,
In these operating instructions we have marked the places
that have to do with your safety with this sign: m
m General Safety Rules
WARNING! When using electric tools basic safety pre -
cautions should always be followed to reduce the risk of
fire, electric shock and personal injury.
Read all these instructions before attempting to operate
this product. Save these instructions for future refer-
ence.
•
Keep work area clear. Cluttered areas and benches
invite injuries.
•
Consider work area environment. Do not expose tools to
rain. Do not use tools in damp or wet locations. Keep
work area welllit. Do not use tools in the presence ot
flammable liquids or gases.
•
Guard against electric shock. Avoid body contact with
earthed or grounded surtaces
•
Keep other people away. Do not let others, especially
children, not involved in the work touch the tool or
the extension lead and keep them away from the work
area.
•
Store idle tools. When not in use, tools should be stored
in a dry locked-up place, out of reach of children.
•
Do not force the tool. It will do the job better and safer
at the rate for which it was intended.
•
Use the right tool. Do not force small tools to do the
job of a heavy duty tool. Do not use tools tor purposes
not intended; for example do not use circular saws to
cut tree limbs or logs.
•
Dress properly. Do not wear loose clothing or jewellery
they can be caught in moving parts. Non-skid footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
•
Use protective equipment. Use safety glasses. Use
face or dust mask if cutting operations create dust.
•
Connect dust extraction equipment. If devices are
provid ed for the connection of dust extraction and
collecting equipment, ensure these are connected and
properly used.
•
Do not abuse the lead. Never pull the power cable to
dis connect it from the socket. Keep the lead away from
heat, oil and sharp edge.
•
Secure work. Where possible use clamps or a vice to
hold the work. It's safer than using your hand.
•
Don't over reach. Keep proper footing and balance at
Article No. 8800 0011
Article No. 8800 0012
Article No. 8800 0013
Publicité
Table des Matières
