Inspection And Maintenance Plan - Güde Eco Wheeler 400 PD Traduction Du Mode D'emploi D'origine

Inspection and maintenance plan

Regular servicing period
Engine oil Inspection
(10W-40)
Change
Air filter Inspection
Change
Spark plug Inspection
Clean
Change
Provide appropriate servicing upon the earlier of the following: in the given month or after the specified hours of
operation have expired.
Defects searching
Cause
Defect
The motor does not start Primary pump has not been used
Lack of fuel
Bowden cables are too long
Wrong fuel, storing without petrol tank
being drained
Sooted spark plug (carbon residues on
electrodes), electrodes distance too big
The spark plug is wet from petrol
(oversaturated engine).
Grass is not collected Blocked channel
Full collection bag
Too wet grass
Before After 1 After 3
any start- month months
up
5 25 Hours
Hours of of opera-
operation tion
23
ENGLISH
After 6 After 12 After 24
months months months
50 Hours 100 Hours 250 Hours
of opera- of opera- of opera-
tion tion
Measure
Use the primary pump
Add some fuel
Adjust the Bowden cables using the
coupling nut.
23
Drain the fuel tank and carburettor.
Add fresh petrol.
Clean the spark plug, check the plug ther-
mal value, possibly change the plug, set
the electrodes distance to 0.6-0.7 mm
Dry the spark plug out and refit it.
Clean the ejection channel
Empty the collection bag
Cut in dry weather
33
tion