EWT ULTIMAIR Manuel D'utilisation page 10

SPECIFICATIONS
Model
EAN code
Power
Air flow
Number of speed
LED screen
Column material
Remote control
Oscillation
Night Mode
Turbo mode
Timer
Handle
Sound level
Voltage
Product dimensions (WxDxH)
Product weight
INSTRUCTIONS OF USE
BEFORE USING THE APPLIANCE FOR THE FIRST TIME :
1. Please read these instructions carefully before using the appliance
and keep them for future use.
2. Check that the voltage of your local electricity network complies
with the one which appears on the appliance.
3. Before using the appliance for the first time, remove the appliance's
protective films, sticker or any other advertising item.
CONTROL USING TOUCHSCREEN ON THE BASE OF THE APPLIANCE
The appliance can be controlled using the LED display screen (3) on
its base or using the 2-in-1 magnetic control panel (1).
Once the appliance is plugged in, it will be automatically set to
standby mode.
APPLIANCE ON/OFF
To switch the appliance on, press the LED display screen on the base
of the appliance.
To switch the appliance off, long press the LED display screen on the
base of the appliance.
Oscillation mode will be activated before it switches off. Make sure
that you keep pressing the LED display screen until the appliance has
gone into standby mode.
SPEED CONTROL
To control the ventilation speed of the appliance, press the LED
touchscreen. Every quick press on the LED touchscreen will increase
the speed from speed 1 towards speed 9.
Turbo and Night ventilation modes are activated using the 2-in1
magnetic control panel (1).
OSCILLATION
To activate oscillation of the appliance, press the LED touchscreen for
1 second. A sound will be emitted to signal that automatic oscillation
has been switched on.
Press the LED touchscreen again for 1 second to switch oscillation
10
ULTIMAIR_A4.indd 10 ULTIMAIR_A4.indd 10
ULTIM'AIR
3 046 171 904 744
26W
2700 m3/h
Yes – touch control
Aluminium
Yes, 2 in 1 magnetic control panel
(CR2025 battery)
Yes – 90° Automatic
Yes – Silent
Yes
8H
No
48 dB
DC 5V Motor
W23 x D23 x H96 cm
2.6 kg
off. A sound will be emitted to signal that automatic oscillation has
been switched off.
To activate oscillation, do not press the LED touchscreen for longer
than 1 second, otherwise the appliance will go into standby mode.
9 NOTE: The LED touchscreen will automatically switch off when it is
not pressed for a period of 20 seconds.
NOTE: Use the 2-in-1 magnetic control panel in order to benefit from
all of the appliance's functions.
2 IN 1 MAGNETIC CONTROL PANEL
The appliance has a 2-in-1 magnetic control panel.
It can be used as a control panel when it is attached to the top of the
appliance via use of magnets.
You can also remove it from the appliance and the control panel will
become a remote control, allowing you to fully control the appliance
remotely.
CONTROL USING THE MAGNETIC CONTROL PANEL
Appliance On/Off
Press the button to switch the appliance on or off.
Oscillation
Press the button to activate oscillation of the appliance. A sound
will be emitted to signal that automatic oscillation of the appliance
has been switched off. Press the button again to switch automatic
oscillation off, at which point a sound will be emitted to signal that
this has occurred.
Timer
Press the button to activate the timer in order to programme the
appliance to switch off. The timer can be set for a period of between
1 and 8 hours.
Speed control
Press this button to increase ventilation speed.
Press this button to reduce ventilation speed.
The appliance has 9 ventilation speeds.
FR EN DE
Press
displa
selec
In Tu
ultrap
Press
displa
selec
In Nig
ideal
distur
1. Wh
2. Re
3. Av
4. Ba
CLEA
• Alw
• Cle
• If t
• Do
• Do
• Do
• En
• If t
25/11/19 11:21 25/11/19 11:21
T
N
dia
po
co
Wh
fro
Ple
an
(ad
pro
cle
co
ca
aff