Remote Control - Abus eytron TVVR50011 Manuel Utilisateur

Important safety information
To avoid the possibility of fires, the plug should al- To avoid the possibility of fires, the plug should a
•
ways be disconnected from the network socket if the onnected from the network socket if the
device is not used for long periods. Disconnect the device is not used for long periods. Disconnect the
device from the mains power supply before impen device from the mains power supply before impend-
ing electrical storms, or use an uninterruptible power ing electrical storms, or use an uninterruptible power
supply.
Warning
Never open the device on your own! There Never open the device on your own! There is a
risk of electric shocks!
If it is necessary to open the device, consult If it is necessary to open the device, consult
trained personnel or your local maintenance spe- trained personnel or your local maintenance sp
cialist.
The installation or modification of a HDD should only The installation or modification of a HDD should only
•
be made by trained personnel or your local mainte- be made by trained personnel or your local maint
nance specialist.
Warning
The installation of additional equipment or modif The installation of additional equipment or modifi-
cation of the device invalidates your guarantee if cation of the device invalidates your guarantee if
not carried out by trained personnel. not carried out by trained personnel.
We recommend having the HDD installed by a We recommend having the HDD installed by a
maintenance specialist.
Your guarantee is invalidated in the event of im- Your guarantee is invalidated in the e
proper installation of the HDD.
Overloading / overvoltage
Avoid overloading of mains sockets, extension cables Avoid overloading of mains sockets, extension cables
•
and adapters as this can result in fires or electric and adapters as this can result in fires or electric
shocks.
Use overvoltage protection to prevent damages Use overvoltage protection to prevent damages
•
caused by overvoltage (e.g. electrical storms).
Cables
Always hold cables by the connector, and do not pull Always hold cables by the connector, and do not pull
•
the cable itself.
Never touch the mains cable with wet hands, as this Never touch the mains cable with wet hands, as this
•
can lead to a short circuit or electric shock. can lead to a short circuit or electric shock.
Never position the device, furniture or other heavy Never position the device, furniture or other heavy
•
items on the cable. Ensure that the cable does not on the cable. Ensure that the cable does not
become kinked, especially on the connector and become kinked, especially on the connector and
sockets.
Never knot the cable, and do not tie it to other cables. Never knot the cable, and do not tie it to other cables.
•
All cables should be laid so that they cannot be All cables should be laid so that they cannot be
•
stepped on or cause an obstruction.
A damaged mains cable can cause a fire or electric ns cable can cause a fire or electric
•
shock. Check the mains cable from time to time. shock. Check the mains cable from time to time.
Never modify or manipulate the mains cable or plug. Never modify or manipulate the mains cable or plug.
•
Do not use plug adapters or extension cables that do Do not use plug adapters or extension cables that do
•
not conform to the applicable safety standards, and do not conform to the applicable safety standards, and do
not make alterations to power supply cables or mains lterations to power supply cables or mains
cables.
10
electrical storms).
Installation location / operating enviro
ment
Position the device on a firm, level surface and do not Position the device on a firm, level surface and do not
•
place any heavy objects on the device. place any heavy objects on the device.
The device is not designed for The device is not designed for operation in rooms
•
subject to high temperatures or moisture (e.g. bat subject to high temperatures or moisture (e.g. bath-
rooms), or in excessively dusty rooms. rooms), or in excessively dusty rooms.
Operating temperature and ambient humidity: Operating temperature and ambient humidity:
•
-10 ° C to 55 ° C, maximum 85% relative humidity. The ° C to 55 ° C, maximum 85% relative humidity. The
device may only be operated in moderate climate device may only be operated in moderate climate
conditions.
Ensure the following:
Sufficient ventilation must be present at all times (do Sufficient ventilation must be present at all times (do
•
not place the device in a storage rack, on thick car- not place the device in a storage rack, on thick ca
pets, on a bed or anywhere where the ventilation pets, on a bed or anywhere where the ventilation
slots are covered. Make sure that a gap of at least slots are covered. Make sure that a gap of at least
10 cm is present on all sides). t on all sides).
The device must not be exposed to direct heat The device must not be exposed to direct heat
•
sources (e.g. heaters).
The device must not be exposed to direct sunlight or The device must not be exposed to direct sunlight or
•
strong artificial light.
The device must not be placed in close proximity to The device must not be placed in close proximity to
•
magnetic fields (e.g. loudspeakers). magnetic fields (e.g. loudspeakers).
Naked flames (e.g. candles) must not be placed on or ked flames (e.g. candles) must not be placed on or
•
near the device.
Contact with spraying or dripping water and aggres- Contact with spraying or dripping water and aggre
•
sive liquids must be avoided. sive liquids must be avoided.
The device must not be operated in close proximity to The device must not be operated in close proximity to
•
water, and must not be submerged under any cir- water, and must not be submerged under any ci
cumstances (do not place objects containing water on es (do not place objects containing water on
or near the device, such as vases or drinks). or near the device, such as vases or drinks).
Foreign objects must not penetrate the device. Foreign objects must not penetrate the device.
•
The device must not be exposed to strong variations The device must not be exposed to strong variations
•
in temperature, as this can lead to condensation and in temperature, as this can lead to condensation and
electrical short circuits.
The device must not be exposed to excessive jolts or The device must not be exposed to excessive jolts or
•
vibrations.

Remote control

Remove all batteries if the device will not be used for Remove all batteries if the device will not be used for
•
a sustained period, as these can leak and damage a sustained period, as these can leak and damage
the device.
/ operating environ-