Technical Data; Safety Precautions And Warnings; Safety Instructions - Storch Power HDR225 FUEL Mode D'emploi

Technical data

Working pressure
Water flow Q IEC
Max. water inlet temperature
Min. / max. water inlet pressure
Thrust
Suction height, primed (at max. 8° C)
Oil quantity in pump / gear
Oil quantity in motor
Oil type (motor / gear)
Oil type (pump)
Vibrations
Noise power level, LWA
Dimensions (L x W x H)
Max. water supply hose (always 3/4")
Max. high-pressure hose length
All information is without guarantee! Subject to technical modifications and errors!

1. Safety instructions

Symbols used to mark instructions
WARNING & Safety instructions
in these operating instructions which must be observed to prevent risks to persons are marked with this
danger symbol.
Before starting up your high- pressure washer for the first time, this safety instruction must be read
through carefully. Save the instructions for later use.
This symbol marks safety instructions related to connection of the machine to water mains.
Safety instructions
For your own safety
WARNING!
The high pressure washer may only be used by persons instructed in its use and who have been expressly authorised to
do so. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Machines shall not be used or maintained by children. Children should be supervi-
sed to ensure they do not play with the appliance. Use of this machine is subject to the applicable local safety regula-
tions and proper use. Please refer to Operating Instructions for recommended use, maintenance and problem solving.
Never spray electrical equipment with water: danger for persons, risk of short-circuiting.
225 bar
840 l/h
60° C
1/10 bar
42,9 N
2,5 m
0,4 l
1,0 l
SAE 15-40
SAE 15-40
> 2,5 m/s
2
90,8 dB (A)
1.067 x 686 x 660 mm
25 m
30 m
51 Original instruction