List Of Materials; Parts Supplied; Parts Not Supplied; Tools/Materials Required - Elica Salice Série Guide D'utilisation, D'entretien Et D'installation

List of Materials

Parts supplied

Removing the packaging
CAUTION!
Remove carton carefully, Wear gloves to protect against
sharp edges.
WARNING!
Remove the protective film covering the product before
putting into operation.
Hood structure assembly with blower, transition.
4 Lamps already installed.
3 Grease filter
4 Duct covers.
Hardware bag with:
Ceiling Mount Template
Use, care and installation guide
ood screws (4 pieces - 3/16" x 1" 3/4)
Assembly screws (71 pieces)
Duct cover brackets (4 each)
8 Vertical supports.
2 Upper Ductcover supports.
2 Horizontal supports.
2 Torx Adapters.

Parts not supplied

Optional Accessories
Ductless Recirculating Kit
To be used only in the Ductless (Recirculating)
version
includes: charcoal filter, charcoal filter support and
fixing bracket, deflector

Tools/Materials required

Wire nuts
Tape to mount template
8" rounded metal duct length to suit installation
Measuring tape
Pliers
Gloves
Knife
Safety glasses
Electric drill with 5/16" and 3/8" Bits
Strain relief
Spirit level
Duct tape
Screwdrivers:
Phillips (Posidrive) # 2
Wire cutter/stripper
Masking tape
Hammer
Saw, jig saw or reciprocating saw
Horizontal support (sup)
Vertical support
Horizontal support (inf)
Vertical duct cover supports
Vertical support (inf)
5