Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
// MOUNTING THE REAR WHEEL
1
Activate the Cage Lock function. Pull the cage of the rear
derailleur forward and press the Cage Lock button with the
symbol .
→ The rear derailleur cage remains tilted forward when
the Cage Lock function is activated. This simplifies the
installation of the rear wheel.
4
Screw the thru axle into the dropout using a 6 mm hex key
and tighten the thru axle to a torque of 12 Nm.
2
1.
Remove the thru axle from the frame.
2.
Remove the transport securing device that is fitted
between the brake pads.
3.
Store the transport securing device for future transport
of your bike.
5
2
Deactivate the Cage Lock function. Pull the cage of the
derailleur slightly forward and carefully return the derailleur
to its original position.
3
1.
Insert the rear wheel into the dropout of the frame.
→ The brake rotor must be placed between the brake
pads.
→ Put the chain on the smallest sprocket of the
cassette.
2.
Slide the thru axle from the brake side (left in the
direction of travel) into the frame dropout and hub of
1
the wheel.
Publicité
Table des Matières
