Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
// USER MANUAL
COMPONENT TASK
Handlebars / Stem
Check the tightening torque.
Torque values, see „8.3 Torques".
Brakes
Check the wear of the brake pads.
→ The brake pad on the metal backing plate must be at least 0.5 mm
thick.
Check the brake rotors for wear.
→ Minimum thickness of the brake rotors: Sram/Avid: 1.55 mm, Magura:
1.8 mm
Bleeding the brakes / changing the brake fluid
Wheels
Servicing the hub:
under normal conditions of use
In case of extreme operating conditions (regular rides in dust, rain, snow, or in
case of frequent transport while raining)
Maintenance activities, see manufacturer' s instructions.
Replace tubeless rim tape.
Check the tubeless rim tape for damages.
The tubeless rim tape needs to be changed when
• the rim tape comes off the rim.
• the imprint comes off and the carrier material becomes visible.
• strong bulges at the spoke holes are visible inwards and the tape wrinkles
strongly at the spoke holes.
Check the spoke tension, dish and wear of the wheel.
INTERVAL
3 months
regularly
regularly
12 months
12 months
3 months
12 months
3 months
10 h*
Publicité
Table des Matières
