Options; Before First Use - Progress PV3571 Notice D'utilisation

10 Progress
How to deactivate AutoOpen
Make sure the appliance is in user mode.
1. Press .
The indicators:
indicator still flashes.

OPTIONS

Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you select
non compatible options, the
appliance automatically
deactivates one or more of
them. Only the indicators of the
still active options are on.
XtraDry
Activate this option to boost the drying
performance. With XtraDry on, the
duration of some programmes, water
consumption and the last rinse
temperature can be affected.

BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
After starting a programme, it may take up
to 5 minutes for the appliance to recharge
the resin in the water softener. It seems
, , are off. The
The indicator indicates the current
setting. If on = AutoOpen is on, if off =
AutoOpen is off.
2. Press to change the setting.
3. Press on/off to confirm and save the
setting.
XtraDry is a permanent option for all
programmes other than
not to be selected at every cycle.
In the other programmes the setting of
XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any time.
Every time
XtraDry is off and needs to be
chosen manually.
How to activate XtraDry
Press simultaneously
indicator comes on.
If the option is not applicable to the
programme, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes off.
that the appliance is not working. The
washing phase starts only after this
procedure is completed. The procedure is
repeated periodically.
The salt container
CAUTION! Use rough salt
designed for dishwashers only.
Fine salt increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
and need
is activated,
and until the