Operating Instructions - Kapro Prolaser Plus 892 N Manuel D'utilisation

OPERATING INSTRUCTIONS

Working in Automatic mode (self-leveling):
The laser level can project a horizontal line, vertical line or
both simultaneously.
1. Remove the laser from the case and place it on a flat,
vibration free surface or tripod.
2. Turn ON/OFF switch to ON.
The laser level will generate the crossed horizontal and
vertical lines and the laser beam indicator will light.
3. Choose the beams you want to use by pushing the Beam
Selector.
4. Before moving the laser level be sure to switch to laser
to the OFF position which engages the lock protect
mechanism.
9