Emergency Stop - SCANGRIP Canvik Titan Notice D'utilisation

GB
OPERATION
The coil spring compressor is exclusively for compressing and decompression of McPherson strut
springs whereby suitable jaws must be used. Any other or further use is considered not as intended.
Fit the jaws on the coil spring compressor using the supplied bolts.
Tighten the Allen bolts firmly. It is very important for your safety that the bolts of the jaws are firmly
tightened.
START OPERATION BY Connecting the motor to 230V. Make sure that the machine is connected to
earth. Activate the green button behind the emergency stop.
Press the right foot pedal to press the spring or the left to release the spring
STOP
: Release the foot pedal

EMERGENCY STOP:

Press the emergency stop at the left side of the spring compressor.
EMERGENCY STOP
Adjustments are made to the vent that regulates the automatic stop for fastening the spring.
7