Very Important; Installation And Transport - SCANGRIP Canvik Titan Notice D'utilisation

GB
Jaws

VERY IMPORTANT!

Upper mounting block should
be lubricated (Super Lube
Before first use
Remove transportation cover and replace with dipstick for oil level check

INSTALLATION AND TRANSPORT

The location must be fully lit so installation and subsequent use can be carried out safely.
The site of operation must be cleared and there cannot be hazardous fluids on the floor or dangerous
edges on adjacent machines or parts that can injure the operator if he/she falls or trips.
To move CANVIK TITAN, press down on the handle until the wheels support the spring compressor.
There is no need to fixate the spring compressor.
Fasten very carefully with 8mm Allen key
Only use correct bolts (DIN 912. M10x30 grade 14.99)
Aerosol) with split lock washer (DIN 7980 M10)
®
6