Technical Data; Note; Warning - TOOLCRAFT T-MS 200 W Notice D'emploi

12. Technical data

Rated voltage ..............................................................................230-240 V/AC, 50 Hz
Rated power input .......................................................................200 W
Speed, n0 ....................................................................................12000 /min
Level of acoustic pressure LpA ....................................................77,3 dB(A); KpA=3 dB(A)
Level of acoustic power LwA .......................................................88,3 dB(A); KwA=3 dB(A)
Level of vibration (K=1.5 m/s2) ....................................................αh = 11,009m/s²
a) Note
• The declared vibration total value has been measured in accordance with a standard test method and may be used
for comparing one tool with another.
• The declared vibration total value may also be used in a preliminary assessment of exposure.
b) Warning
• The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
• Avoid vibration risk.
Wear glove during operation.
Limit operating time and shorten trigger time.
28