Care And Cleaning; Cleaning; Disposal; Technical Data - TOOLCRAFT T-HLP 2000 W Notice D'emploi

10. Care and cleaning

Always disconnect the device before performing any adjustment or maintenance operation. If the supply
cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
a) Cleaning
Avoid using solvents when cleaning plastic parts. Most plastic parts are susceptible to damage from
various types of commercial solvents and may be damaged by their use.
• Use a dry, lint-free cloth to clean the product. To remove stubborn dirt, moisten the cloth slightly with lukewarm
water.
• Disconnect the product from the power supply before cleaning and let it cool down sufficiently.
• Use a soft, dry brush to clean the ventilation openings.
• Take care not to expose this tool to the rain.

11. Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

12. Technical data

Rated voltage ............................................230 V/AC, 50 Hz
Rated power input .....................................2000 W
Temperature .............................................. Cool air
Air volume .................................................. 120 - 550 L / Min
Protection class .........................................II
22
50-630 °C
50-630 °C
120 - 550 L / Min
550 L / Min