Disposal; Technical Data - TOOLCRAFT 1499514 Notice D'emploi

12. Disposal

At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

13. Technical data

Housing material ...............................................PP
Hose material ...................................................PU (fabric-reinforced)
Working pressure .............................................14 bar
Minimum bursting pressure ..............................28 bar
Hose diameter ..................................................3/8" (inches)
Long outlet hose ...............................................19.8 m (±0.5 m)
Long inlet hose .................................................1.1 m (±0.5 m)
Connector fitting ...............................................1/4" (inches) (British standard Pipe)
Hose diameter (interior/exterior) .......................9.3 mm/13.5 mm
Width across flats (on the fitting) ......................14 mm (13.83 mm)
Connector diameter (interior) ............................9.88 mm (male) 12.08 mm (female)
Operating conditions ......................................... -5 to +45 °C, 20-80 % relative humidity (non-condensing)
Dimensions (L x W x H) ....................................29 x 20 x 34 cm
Weight ..............................................................3.2 kg
17