Intended Use; Delivery Content - TOOLCRAFT T-MS 200 W Notice D'emploi

3. Intended use

Working hints for your sander
• Your sander is useful for working on wood, metal, painted surface. It will smooth surfaces prior to painting, even
where fillers have been used.
• Your sander is best suited to large flat areas such as doors but can also be used on skirting boards, windows, etc,
provided they are accessible.
• Different types of sanding paper will allow the sander to meet various needs. Different grades of sanding paper are
available, the higher grade number, the finer the grit. For rough work start with a low grade of grit (i.e. 80 grade)
and change to a higher, finer grade (i.e. 100 or 120) for finishing. If you use a fine grade for rough surfaces it will
soon clog and need changing.
• At all times, let the sander do the work-do not force it or apply excessive pressure to the sanding paper or it could
wrinkle or tear. Preferably, use a light circular motion.
• If the surface shows excessive making from the abrasive motion, you may be using a grit which is too coarse or
applying too much pressure.

4. Delivery content

• Detail sander: 1pc
• Sanding paper: 3pc (60#, 80#, 120#)
• Dust box: 1pc
• Instruction manual: 1p
After unpacking, check the tool and accessories for damages and do not use the tool in case something is defective.
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
19