Spare Parts, Reserve Pumps; Spare Parts; Reserve Pumps - ITT VOGEL-Pumpen TVS 8.1 Série Instructions De Montage, De Service Et De Maintenance

Installation, Operating and Maintenance Instruction

11. Spare parts, Reserve pumps

11.1 Spare parts

Spare parts should be selected to last for two years of
continuous operation. If no other guidelines are
applicable we recommend that you stock the number
of parts listed below (in accordance with DIN 24296).
Spare Parts
Impeller
Guide wheel or multi-stage
casing
Joints for pump casing
Bearing bush
Bushing (if present)
Shaft + coupling
Non-return valve
Other joints
P = Number of pumps (incl. stand-by pumps)
Ordering spare parts
When ordering spare parts, please supply the following
information:
Type:
______________________________________________________________________
Order no.:
_______________________________________________________________
Sectional drawing:
__________________________________________________
Part designation:
_____________________________________________________
All the information is given in the relevant sectional
drawing.
TVS 100-english
Article No 771072001
Number of Spare Parts
1 - 2 3
1 x N 1 x N
0,5 x N 0,5 x N
4 6
sets
sets 2 2
2 2
1 1
1 1
sets 4 6
page 35
To ensure optimum availability, we recommend
that suitable quantities of spare parts are held in
stock, especially if these are made from special
materials because of the longer delivery times.
P
4 5 6 - 7
1 x N 2 x N 2 x N
0,5 x N 1 x N 1 x N
8 8
2 3
2 3
2 2
2 2
8 8
N = Number of steps

11.2 Reserve pumps

It is essential that a sufficient number of stand-
by pumps are kept ready for use in plants where
failure of a pump could endanger human life or
cause damage to property or high costs.
Regular checks should be carried out to ensure
that such pumps are always ready for use (see
Point 8).
Model TVS
8 - 9 10/more
3 x N 0,3 x N x P
1,5 x N 0,15 x N x P
9 12 0,15 x N x P
3 4 0,5 x N x P
3 4 0,3 x N x P
2 3 0,3 x N x P
2 3 0,3 x N x P
9 10 1 x N x P
Revision 01
Issue 11/2006