Ayce 1289595 Mode D'emploi page 97

Please note: After language is switched, it can be effective only after restart.
5.1.3. Machine Setting
Click "Machine" on the menu bar→ "Machine Setting", enter to machine setting
interface, as shown in figure below.
Blue Box refers to the size of machine printing platform, we have already
performed the preset according to your choice of model, please do not change these
data.
Red Box refers to the associated settings of machine, including adding new
machine model you need, delete the machine model you don't need, also can modify
the name of machine model, modification of machine model name would not
change any parameters.
5.1.4. Printing Parameters Settings
Click "Expert" on the menu bar→ "Switch to full settings... ", go into the complete
setting interface, as shown in figure below.
Red Box is Printing Quality Parameter.
Layer height: is the printing precision we usually refer to, and is generally chosen
between 0.1 and 0.25, the smaller the data is, the higher the model precision is.
External shell layer thickness: the thickness of outermost surface can improve the
surface quality, and is multiple of nozzle size (is also the multiple of 0.4)
Black Box is Stuffing Parameters.
Bottom and top thickness: the thickness of model bottom layer and top layer, it is
suggested to use the same parameter as the external shell.
Packed density: It refers to packed density of model. The interior of model is not
completely packed, and it would not affect the surface quality, but affect the intensi-
ty only.
Blue Box is Speed and Temperature Parameters
Printing speed: If the printing object is relatively small, please use the low speed.
Printing temperature: it refers to the temperature of printing spray-head, the
temperature to print the PLA/PLA pro consumables is 190-210 degree.
Green Box is Support Parameters
Support type: shown as figure below, "None" refers to not use the support, "Touch-
ing build plate" is external support, "Everywhere" is complete support, the support
type can be choose according to the model suspending in the air.
191 192
GB