Installation Of Software; Install Python; The Installation Of Replicatorg Ayce Special Use Version - Ayce 1289595 Mode D'emploi

3.INSTALLATION OF PRINTING SOFTWARE
Software Type Software usage
This program is used to transfer "gcode" and "x3g" file
Ayce _V44EN.exe
to "stl" file. When the 3D printer connected to computer
(ReplicatorG) by a digital wire, you can use ReplicaterG to control the
printing from computer.
Python is a must program for ReplicatorG, and it makes
Python _ 2.7.6.msi
ReplicatorG can achieve model data format conversion.
Cura is an open source software. It can be used to slice
3D Model.
Cura _AyceV1.2.5.exe

3.1. Install Python

Python is an object-oriented、literal-style computer programming language.
ReplicatorG slicing software (skeinforge) is written in Python language. And so
Python must be installed before installing ReplicatorG software,Otherwise,
ReplicatorG software can not start .Open the CD (14) or go to official website to
download the installation package(www.ayce.ch). Runing the python-2.7.6.exe,
execute the installer and follow the directions to install the software. Please choose
the default path as the Destination Directory, otherwise the following ReplicatorG
software could not find the library path.
Choose the default option to install all the features.
After the installation is complete, click Finish to exit。

3.2. The Installation of ReplicatorG AYCE Special Use Version

Run the software installation package from CD (14), AYCE_V42.4_EN, in the
installation wizard window, click "next"→"I Agree" to continue. In the window of
selection installation path window, please use the program default route.
181 182
GB