Lovibond LC 100 Manuel De Demarrage Rapide page 12

7. Outputting Reports
USB Report Mode
The USB report mode option is used to set the device USB mode for output of
reports to computer. When the device is in this mode, it will work with your
computer with similar function to a USB memory stick.
1. Plug your device into the USB port of your computer.
2. Select the USB Report Mode option from the list by pressing the up and
down sides of the Navigation control.
3. Press the Enter button to switch the device in to the USB Report mode.
The device will display the USB Report Mode Active window
4. The device will now be recognized on your computer as a removable
disk "LC 100". If this is the first time you have plugged in your device
running in the USB Report mode, the new device installation prompt will
be seen and the required drivers will automatically be installed. Double
click the LC 100 icon to explore the contents.
5. Two report options are provided:
a. QCREPORT.PDF – This provides a multipage formatted report ready
for you to use directly for your quality records.
b. DATA.CSV – This provides data for the measured standards and
samples that can be easily manipulated in Excel to a format of your
preference or for more advanced data collection and analysis.
Lovibond® LC 100
10