newcook 3D Manuel D'utilisation page 72

After selecting the menu, the cooking time and pressure (if necessary), the programmable pot will cook for you. The first
stage of cooking is the automatic detection of food and heating because what you select is the actual cooking time.
The programmable pot detects the amount of food you are cooking, so you should only set the time marked in the recipe
regardless if it is for one or for 10 guests. During this process, the set time and a script in motion will appear on the screen,
as this process is completed, the script will remain fixed while your programmable pot is cooking, the time left to finish will
be displayed, discounting each minute originally scheduled for you.
You will know that your programmable pot has finished cooking by its 3 beeps.From that point, the warm function will be
automatically activated indefinitely and with it the light signal, so that the pot will keep the food warm until serving time.
(ATTENTION, this menu will only be disconnected when you press the cancel button)
To open the lid, the first step is to ensure there is no pressure inside (otherwise the programmable pot will not allow you
to open the lid) moving the valve in the open position where all the steam within your programmable pot will be ejected.
PROGRAMMING THE POT
Program the programmable pot to have the freshly cooked food at a specific time:
1. Click the "LUNCH TIME" button
tell the programmable pot how many hours are left for serving the food, not the time you want to eat, it is important
to indicate properly the time remaining to eat. Lunch Time is set in 10 minutes intervals. By pressing the button
increases up to 24 hours.
2. Select the menu, the cooking time and pressure kind, as indicated in the previous section.
The programmable pot automatically calculates when to start cooking so that the food is freshly made at the scheduled
time, if the cooking time is longer than the time remaining before the scheduled time, your programmable pot will start the
cooking cycle, to get as close as possible to the preset time. It is important that you program the pot at least two hours in
advance.
If while cooking or waiting a power failure occurs, the programmable pot remember its programming and when the current
is back your programmable pot will continue at the same point where the cooking process stopped.
The programmable pot includes the "warm" system which is operated automatically when it stops cooking and keeps the
food warm indefinitely without cooking it again, until you press the CANCEL button. Remember to cancel this function to
finish using your programmable pot.
72
, and select when you want to have your lunch. To select lunchtime, you must
HORA DE
COMER
HORA DE
COMER
English