Marmitek 09048 Mode D'emploi page 8

2. Press and hold SETUP until the LED indicator lights steadily.
Release the setup button.
3. Use the number button to enter the number equivalent to the
chosen House Code (1=A, 2=B, .... 16=P).
4. Press the ENTER button to confirm the House Code. The LED
turns off.
Note: The Housecode you choose must match the Housecode on
the Transceiver Module (TM12 or Marmitek Alarm Console) you are
using it with.
4. Technical data
Operating voltage:
Transmitter:
Ambient temperature: 0°C to +30°C
Dimensions:
Copyright Marmitek X-10 .
The right is reserved to make technical modifications.
3V, 2 x 1.5 V AAA ("micro") batteries
model 09048 RF 433MHz + infrared
model 09050 Infra-red
170 x 50 x 30 mm
7