Battery Compartment - Marmitek 09048 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Battery compartment

The battery compartment is to be found on the rear side of the
remote control unit. Stored data will not be retained when the
batteries are being replaced. Please always use batteries of the
same size and voltage (1.5 V "micro" batteries).
Note: When batteries are replaced, the empty ones must be
disposed of in an environmentally sensible manner.
4. Controlling your home using Marmitek X-10 Home
Automation Modules (available seperately)
The Marmitek 4 in 1 remote allows you to control practically
everything electrical in your home. Besides IR technology that lets
you control all your TV, VCR, Cable and Satellite equipment it has X-
10 RF technology (model 09048 RF 433MHz only) that lets you
control lamps and appliances anywhere in your home remotely.
Here are just some of the things you can do with your Marmitek 4in 1
remote using the Marmitek X-10 feature:
Turn lights off or on and dim then while watching TV
Start the coffee from your bedroom when you wake up
Turn on lights at night to scare away intruders if you hear a
noise
Turn on your electric blanket before the movie ends, so it's nice
and warm to go to bed
Home Automation Modules, which just plug into the existing wall
sockets. No extra wiring is needed. Ask your dealer for more
information.
Controlling Marmitek X-10 Modules
You can control the Marmitek X-10 Modules as follows:
1.
Press and release the Marmitek X-10 button.
2.
Use the number buttons to enter the Unit Code number of the
chosen Module (You do not need to enter '0' first for a single
digit number).
3.
Press the appropriate button for the function you require (see
below).
Marmitek X-10 functions:
On:
Off:
Bright:
Dim:
All Lights On:
All Units Off:
Changing the X-10 House Code
The Marmitek 8 in 1 remote defaults to House Code A, and in most
cases you will not need to change this unless you are experiencing
interference form a neighbouring X-10 system.
1.
Press and release the Marmitek X-10 button.
CHANNEL +
CHANNEL -
VOLUME +
VOLUME -
Power
Mute
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

09050

Table des Matières