Gelé At Technical Specifications; Equipment Identification - IARP GELÉ 200 Instructions D'emploi

2.3 GELÉ AT TECHNICAL SPECIFICATIONS
External dimensions
(Width x depth x High) (mm)
Gross volume (Liters)
Net volume (Liters)
Refrigeration
Defrosting
Climate class
Temperature
Refrigerant
Electrical power supply (V / Hz)
Gross weight (Kg)
Net weight (Kg)
3. NOTES AND WARNINGS
The content of this manual is technical and the property of EPTA s.p.a. It is forbidden to reproduce,
distribute or modify entirely or partially its content without written authorisation.
The owner company safeguards its rights pursuant to legislation in force.
The company cannot be held in any way liable for any damage to people, animals or the product conserved in the event of:
• Improper use of the equipment or use by unsuitable or unauthorised staff.
• Non-compliance with the standards in force
• Incorrect installation and/or faulty power supply
• Non-compliance with this manual
• Non-compliance with the maintenance program
• Unauthorised changes
• Installation of non-original spare parts on equipment
• Installation and use of the equipment for purposes other than those characterising design and sale
• Tampering with or damage to the power supply cable
Responsibility for application of the safety provisions outlined below is the responsibility of the technical staff
responsible for the activities planned on the equipment, who must ensure the authorised staff:
• Are qualified to perform the task requested
• Know and strictly comply with the provisions contained in this document
• Know and apply the general safety standards applicable to the equipment
Tampering with or unauthorised replacement of one or more parts of the equipment, use of accessories that
change its use and use of spare parts differing from those recommended can cause risks of accidents.
Any intervention on the equipment strictly requires disconnection of the power socket and however no guard
(grids, casings) should be removed by unqualified staff; strictly avoid operating the freezer with these guards
removed.
4.

EQUIPMENT IDENTIFICATION

• Located on the plate affixed to the machine to detect the technical data.
• Check the model and power supply voltage before carrying out any operation.
• If discrepancies are found, immediately contact the manufacturer or the company that supplied the equipment.
The identification plate indicates:
frequency (Hz), Absorbed electrical power (W),
volume, Type and quantity of
It is strictly forbidden to remove, tamper with the plate and change or alter the data
contained in it.
200
690 x 670 x 900
170
126
Static
Manual
4
-12°C / -26°C
R600a
230 / 50
42
38
Manufacturer, Code,
Absorbed electrical power in defrosting (W),
refrigerant, Climate class.
300
1060 x 670 x 900
310
238
Static
Manual
4
-12°C / -26°C
R600a
230 / 50
57
52
Conformity marking, Power supply voltage
400
1280 x 670 x 900 1500 x 670 x 900
394
305
Static
Manual Manual
4
-12°C / -26°C -12°C / -26°C
R600a R600a
230 / 50 230 / 50
61
55
(V),
Light max. power
500
477
372
Static
4
65
58
Power supply
(W), Gross
-10-