Bosch AQUATAK 150 PRO Instructions D'emploi page 14

F016 L70 375 - GB Seite 2 Montag, 14. November 2005 1:15 13
Product Specification
Power washer
Part number
Rated power [W]
Supply Temperature
max. [°C]
Supply rate min. [l/h]
Supply pressure max. [bar]
Working pressure [bar]
Max. Operating pressure [bar]
Flow rate [l/h]
Detergent capacity [l]
Weight [kg]
Protection class
Serial Number See serial No 15 (rating plate) on machine.
Intended Use
The product is intended for cleaning areas and ob-
jects outside the house, tools, vehicles and boats.
Drainage pipes can be unclogged and rust or paint
coatings can be removed, if the appropriate acces-
sories such as cleaning agents approved by Bosch
are used. This product should not be used for pro-
fessional use.
Intended Use is related to operation within 0 °C and
40 °C ambient temperature.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately 26 - 29,1 kg. If necessary, obtain assistance
to remove from packaging.
Delivered Items
Carefully remove the machine from its packaging
and check that you have all the following items:
– Power washer
– Power gun/high pressure hose
– Vario-jet-fan power lance
– Roto power lance
– Inlet connector
14 • F016 L70 375 • TMS • 21.10.05
AQUATAK 150 PRO AQUATAK 150 PRO X AQUATAK 160 PRO X
3 600 H77 A.. 3 600 H77 B..
2 700 2 700
60 60
17 17
1.5 – 6.0 1.5 – 6.0
140 140
150 150
550 550
3.0 2 x 1.5
26 27.5
/ I / I
– Operating instructions
– Storage hooks (AQUATAK 150 PRO – 2x.
AQUATAK 150 PRO X/160 PRO X – 1x)
– Hose reel handle
(Aquatak 150 PRO X/160 PRO X only)
– Retaining screw
(Aquatak 150 PRO X/160 PRO X only)
When parts are missing or damaged, please contact your
dealer.
Operating Controls
1 Trigger safety lock
2 Trigger
3 High pressure hose
4 Hose drum
(Aquatak 150 PRO X/160 PRO X only)
5 Handle (Aquatak 150 PRO X/160 PRO X only)
6 Detergent tank
7 Power gun
8 Storage hooks
9 Vario-jet-fan power lance
10 Main switch
11 Detergent adjustment knob
12 Pressure gauge
13 Water inlet connection
14 Roto power lance
15 Serial Number
Not all of the accessories illustrated or described are
included as standard delivery.
English - 2
3 600 H77 C..
3 000
60
17
1.5 – 6.0
150
160
600
3.0
29.1
/ I