LD Systems ICOA Série Manuel D'utilisation page 7

AUDIO SETTINGS (AUDIO)
Press the rotary-push encoder to access the main menu and then turn the encoder to select the menu item AUDIO (dark background). Press
the encoder again to access the submenu and then turn the encoder to select the desired submenu item. Confirm the selection by pressing
the encoder. Turn the encoder to change a value and then confirm the change in value by pressing the encoder. Refer to the table below for
the submenu items and the relevant information. In the submenu, select MAIN MENU and press the encoder to return to the main menu.
In the main menu, select HOME and then press the encoder to confirm this selection and return to the main menu. The main menu will
automatically be displayed after approx. 8 seconds of inactivity.
AUDIO (Change value = turn encoder, confirm change in value = press encoder)
MAIN MENU
Return to main menu
PRESET
Selection of the speaker preset
HIGH EQ
Setting treble frequencies from -10dB to + 10dB
MID EQ
Setting mid frequencies from -10dB to +10dB
LOW EQ
Setting bass frequencies from -10dB to +10dB
DELAY
Time delay of the audio signal in 0.32 ft steps up to 32 ft (0 ft = OFF, display in meters and feet)
FULL
RANGE
MONITOR
FLAT
SAT
7