TEFAL ClipsoMinut Perfect Guide De L'utilisateur page 12

Fitting and removing the timer*
To fit the timer (F)
into the module and then press to clip the rear part.
To remove the timer (F), lift it using the tab and remove
it.
Changing the timer* battery
The timer battery is a CR2032 type.
If the symbol
The battery life depends on how often the timer is used.
The battery contains Dimethoxyethane no. CAS 110-71-4. It is in
accordance with the European regulations. For your safety and the
environmental protection: do not open the battery, do not expose it to
high temperatures, do not throw it with household waste. Dispose of
battery at a battery disposal point.
Non-rechargeable batteries should not be recharged.
The battery must be inserted in the correct polarity.
A dead battery must be removed from the device and disposed of safely.
If the device is to be stored without being used for a long period of time, the battery
should be removed.
The power terminals must not be short-circuited.
Place the timer on a flat work surface.
To remove the battery from your timer, open the battery cover
with a coin (see illustration opposite), and carefully retain the
battery sealing ring.
Replace your battery (see diagram opposite).
Replace the battery sealing ring in it's casing.
Position the "half moon"
"half moon"
Gently turn the battery cover and continue to press lightly as
●
you align the "half moon"
moon on the timer.
Work on a flat work surface so that the cover is positioned
correctly horizontally.
Do not force the battery cover when you close it. Do not turn
beyond the stops.
If you lose your timer, you can purchase another from all of
our TEFAL Approved Service Centres.
10
- Fig. 12, first insert the front part
appears, or if you no longer have a display, change the battery.
on the battery cover opposite the
on the timer.
on the battery cover with the
2
1
2 2
+
*depending on model