Parent Unit; Display In Standby Mode - Alecto DVM-700 Mode D'emploi

2.2 PARENT UNIT:

1. photo cell for the display
brightness
2. display power button (sound
transmission remains active)
3. parent unit power button
4. push-buttons for loud or soft
volume
5. talk-back button to baby unit
6. power indicator
7. MUTE indicator, illuminates
when the volume is set to
level 0 (off)
8. display
9. to confirm changes during or
after setup and to return to
the standard display
10. built-in microphone
Vol. Talk
Power Mute
11. built-in speaker
12. battery cover
13. table stand
14. power adaptor input
Home
1 2 3 4 5
Vol.
Talk
Power Mute
Vol. Talk
6 7
Power Mute
8
Home
Home
9 10
11 12 13

2.3 DISPLAY IN STANDBY MODE:

1. touch to enter the night light and
lullabies menus
2. actual time
3. reception indicator:
4 bars: excellent reception
3 bars: good reception
2 bars: average reception
1 bars: weak reception
4. temperature of the room in which
the baby unit is placed, the backlighting will indicate the temperature status:
<15°C blue colour
16-20°C yellow colour
21-24°C orange colour
>25°C red colour
5. the icon will appear here when the speaker is switched off (level 0); nothing
X
is shown here when the speaker is switched on
6. battery indicator:
battery full (battery colour is green)
battery 3/4 full (battery colour is green)
battery 1/2 full (battery colour is yellow)
battery 1/4 full (battery colour is red)
battery nearly empty (battery outline flashes in red)
battery is being charged
7. sound indicator: 4 green and 3 red bars will illuminate according to the rhythm
of the baby making sounds; this is especially useful when the volume is muted
14
39
1 2 3 4 5
7
too cold
recommended
too warm
too hot
6