Johnson LIVESTRONG LS13.0T Manuel Du Propriétaire page 15

ASSEMBLY STEP 5
HARDWARE FOR STEP 5 :
FLAT
WASHER (B)
8 mm
Qty: 6
HEART RATE GRIP BARS
HEART RATE CABLES
FLAT WASHERS (B)
SPRING WASHERS (C)
BOLTS (E)
SPRING
BOLT (E)
WASHER (C)
15 mm
8 mm
Qty: 6
Qty: 6
Open HARDWARE FOR STEP 5.
A
Connect the HEART RATE CABLES and
B
carefully tuck them inside the CONSOLE.
NOTE: Be careful not to pinch the heart rate
cables while attaching the heart rate grip bars.
Attach HEART RATE BAR to the CONSOLE
C
using 2 BOLTS (E), from the front and 1 BOLT
(E) from below.
Repeat on other side.
D
LS10.0T ASSEMBLY COMPLETE!
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.
ALL
MODELS
15